thomann STAIRVILLE LS-300, User Manual, Page: 16 / 24

1.
Remove the safety bolt at the upper and lower tube clamp.
2.
Loosen the safety screw on the lower tube clamp and slide the lower extension tube all
the way down.
3.
Tighten the safety screw on the lower tube clamp.
4.
Loosen the safety screw on the upper tube clamp and slide the lower extension tube all
the way down.
5.
Tighten the safety screw on the upper tube clamp.
6.
Remove the spotlight(s). When dismounting, take care for balanced load, too.
7.
Loosen the safety screw on the truss beam mounting and detach the truss beam.
8.
Loosen the safety screw on the slider to which the three feet are attached.
9.
Fold up the feet of the tripod.
10. Pack all parts of the system in their original package, as possible, and store the package
in a dry place protected against moisture.
Dismounting
Operating
lighting stand
16