10
Troubleshooting
In the following we list a few common problems that may occur during operation.
We give you some suggestions for easy troubleshooting:
Symptom
Remedy
The unit does not work, no light, the fan does
not run
1. Check the power connection and main fuse.
No response to the DMX controller
1. If the display shows a flashing number, for example ‘001’, no DMX signal is
being received. Check the DMX connectors and cables for proper connection.
2. If the display does not flash and there is no response, check the address set‐
tings and DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interference to a DMX interface circuit.
No response to the remote control
1. Check the remote control battery.
2. Try using the remote control at a different angle to the IR sensor on the
front panel of the device.
No response to the wireless foot switch
1. Check the battery of the wireless foot switch.
2. Check in the
‘SYS’
menu whether the interface for the wireless footswitch is
active.
3. Decrease the distance between the wireless footswitch and the LED bar.
Troubleshooting
LED lighting set
26
