thomann Stairville DJ Lase BlueStar MK-II LED User Manual Download

Page: 8 / 52

Signal word

Meaning

DANGER!

This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

NOTICE!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Warning signs

Type of danger

Warning – high-voltage.

Warning – laser radiation.

General information

showlaser

Summary of Contents for Stairville DJ Lase BlueStar MK-II LED





















































Search results

Summary of Contents for Stairville DJ Lase BlueStar MK-II LED

Reviews:

Related manuals for Stairville DJ Lase BlueStar MK-II LED

Brands by name

Popular brands

thomann Stairville DJ Lase BlueStar MK-II LED, User Manual

Search results

Summary of Contents for Stairville DJ Lase BlueStar MK-II LED

Reviews:

Related manuals for Stairville DJ Lase BlueStar MK-II LED

Brands by name

Popular brands