This setting is only relevant if the device is serving as Slave in a Master / Slave configuration
and is not controlled via DMX.
Press
[Mode]
repeatedly until the display shows
‘SLAv’
.
Dimmer operation can only be activated when the unit is operating in stand alone mode or as
master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode]
repeatedly until the display shows
‘Colr’
. Press
[Setup]
. The display shows the cur‐
rent colour temperature setting of the (the display shows
‘U255’
,
‘C255’
). Press
[Setup]
, to
toggle between cold white (C) and warm white (U).
With
[Up]
and
[Down]
you can set the colour temperature in the selected colour temperature
range.
Operating mode ‘Slave’
Operating mode ‘Dimmer’
Operating
LED PAR
34
Summary of Contents for Stairville DCL Flat Par 18x4W CW/WW
