thomann Stairville DCL Flat Par 18x4W CW/WW, User Manual

Page: 33 / 52

Settings for programmes 02 to 05:
To adjust the programme process speed, press again
[Setup] . The display shows ‘SP.xx’ . With
[Up] and [Down] you can now select a value between ‘SP.01’ (slow) and ‘SP.FL’ (fast).
To adjust the strobe frequency, press again [Setup] . The display shows ‘FS.xx’ . With [Up] and
[Down] you can now select a value between ‘FS.00’ (slow) and ‘FS.99’ (fast).
Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode] repeatedly until the display shows ‘AUTO’ . The playback of the automatic show
starts automatically.
The sound controlled automatic show can only be activated when the unit is operating in
stand alone mode or as master in a master / slave combination. This setting is only relevant if
the device is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Soud’ . This activates the sound controlled
automatic show.
Press
[Setup] and use [Up] and [Down] to adjust the sensitivity for the sound control in a range
from ‘SU.00’ to ‘SU.31’ .
Operating mode ‘Automatic’
Operating mode ‘Sound control’
Operating
DCL Flat Par 18x4W CW/WW
33