thomann Stairville CLB4, User Manual

Page: 20 / 52

When the display is flashing in ‘DMX’ mode, no DMX signal is received. Perhaps the DMX con‐
troller is off or the wiring is incorrect. If the display lights up solid, the device is receiving a valid
DMX signal.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Starting up
LED lighting set
20