Press
[MENU]
repeatedly until the display shows
‘d.xxx’
. The unit switches to "DMX" mode. You
can now set the number of the first DMX channel used by the device (DMX address). Use
[UP]
and
[DOWN]
to select a value between 1 and 512 (the display shows
‘d.001’
…
‘d.512’
).
Ensure that this channel number fits to the configuration of your DMX controller.
Press
[MENU]
repeatedly until the display shows
‘Ir.xx’
. With
[UP]
and
[DOWN]
you can now
select between
‘Ir.on’
(remote control functions enabled) and
‘Ir.oF’
(remote control functions
disabled). The changes are applied immediately.
Press
[MENU]
repeatedly until the display shows
‘P.xxx’
. The unit displays 13 different colours
in succession, with each colour displayed separately. With
[UP]
and
[DOWN]
you can select the
progress speed from slow (display shows
‘P.001’
) to fast (display shows
‘P.255’
). The changes
are applied immediately.
Press
[MENU]
repeatedly until the display shows
‘L.xxx’
. The unit displays 13 different colours
in succession, with the colours gradually changing into one another. With
[UP]
and
[DOWN]
you can select the progress speed from slow (display shows
‘L.001’
) to fast (display shows
‘L.255’
). The changes are applied immediately.
DMX mode, DMX address
Enable or disable remote con‐
trol functions
"Colour change" mode
"Auto colour mixing" mode
Instructions for use
BTL-30 Battery Truss Light LED
33
