NOTICE!
Fire hazard
Do not operate the machine unattended.
LED ring and LED panel only light up permanently when the device emits fog. If you
test the settings with the fog output turned off, the LED effects are visible for 10 sec‐
onds.
Connect the device to the mains power grid and turn it on with the main switch. During the
warm-up time of about 9 minutes (
±
1 min) the display shows
‘UP’
. Once the device is opera‐
tional, the display will change to
‘rEAD’
.
When the machine receives a DMX signal, the display shows the set DMX address, even during
start-up and warm-up time. Then the unit does not respond to manual control commands, you
only have the option to adjust the DMX address via the device menu.
Turning the unit on
Operating
fog machine
36
Summary of Contents for Stairville AF-300
