4.
Press
[OK]
to confirm the new value.
ð
The display shows
‘Save successfully!’
.
5.7.1 ‘ADV’ display structure
1
Shows the currently selected pad.
2
Shows the tuning function.
Use the rotary control or press
[–/+]
to adjust the pitch of the selected pad in
12 half-tone increments up or down. Confirm the selection with
[OK]
.
3
Shows the damping effect.
Use the rotary control or press
[–/+]
to adjust the damping effect for the
selected pad between
‘1’
and
‘4’
. Confirm the selection with
[OK]
.
4
Shows the panorama value.
Use the rotary control or press
[–/+]
to adjust the position of the selected pad
within the stereo panorama between
‘0’
and
‘127’
(
‘0’
: dead left,
‘64’
: centre,
‘127’
: dead right). Confirm the selection with
[OK]
.
5.7.2 ‘ADV2’ display structure
1
Shows the currently selected pad.
2
Shows the mute group.
Create a mute group from 1 - 9. Press a pad, then press another pad of the
mute group. The first pad is muted so there is no overlap.
Use the rotary control or press
[–/+]
to set the number of pads for the mute
group between
‘1’
and
‘9’
. Hit a pad, then hit another pad of the mute group.
The first pad gets muted. Confirm the selection with
[OK]
.
3
Shows the behaviour pattern of the selected pad.
Use the rotary control or press
[–/+]
to switch between behaviour patterns.
‘Normal’
: The pad sound gets played once. Confirm the selection with
[OK]
.
‘Switch’
: The pad sounds once it gets played. Play it again to end the sound.
Confirm the selection with
[OK]
.
‘Loop*2/4/8’
: The sound of the pad is repeated as many times as the option
specifies (2, 4, 8). Confirm the selection with
[OK]
.
‘Infinity’
: The pad sound is repeated in an endless loop. Confirm the selection
with
[OK]
.
4
Shows the link between the selected pad and another pad.
Use the rotary control or press
[–/+]
to select the pad to be linked to the cur‐
rently selected pad. This allows you to trigger two pads with just one hit. Con‐
firm the selection with
[OK]
.
#
ö
$
%
#
ö
$
%
Operating
NonaPad
19
