thomann Ignition 2bright Pint FC150 IP, User Manual

Page: 32 / 48

In this menu, you can specify the behaviour of the device when the DMX signal is interrupted.
Press
[MENU] repeatedly until the display shows ‘SET’ . Confirm the selection with [ENTER] . Use
[UP] or [DOWN] to select the ‘DFAL’ option. Confirm the selection with [ENTER] . Use [UP] or
[DOWN] to select the device behaviour on DMX signal failure. The following table shows the
available options:
Menu level 2 Menu level 3 Function
‘DFAL’ ‘Hold’ If the DMX control fails, the
last setting is retained.
‘bLAK’ If the DMX control fails, the
device is blacked out.
Confirm the selection with [ENTER] .
Behaviour on DMX control
failure
Operating
32
2bright Blind 3K
blinder