thomann Ignition 2bright Pint FC150 IP, User Manual

Page: 31 / 48

In this menu, you can specify whether the display should be shown normally or rotated by
180°.
Press
[MENU] repeatedly until the display shows ‘SET’ . Confirm the selection with [ENTER] . Use
[UP] or [DOWN] to select the ‘DREV’ option. Confirm the selection with [ENTER] . Use [UP] or
[DOWN] to select the ‘ON’ option if you want the display to be rotated by 180°.
or
Use
[UP] or [DOWN] to select the ‘OFF’ option if you want the display to be shown normally.
Confirm the selection with [ENTER] .
In this menu, you can set whether the display is automatically switched off or remains perma‐
nently on during operation.
Press
[MENU] repeatedly until the display shows ‘SET’ . Confirm the selection with [ENTER] . Use
[UP] or [DOWN] to select the ‘DbKL’ option. Confirm the selection with [ENTER] . Use [UP] or
[DOWN] to select the ‘ON’ option if you want the display to remain on permanently.
or
Use
[UP] or [DOWN] to select the ‘OFF’ option if you want the display to be automatically
switched off after 30 seconds without keypress.
Confirm the selection with
[ENTER] .
Display reversion
Display illumination
Operating
2bright Blind 3K
31
blinder