thomann HL-x18 CW/WW, User Manual

Page: 29 / 44

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘SPEE’ . Press [OK] . Now you
can adjust the programme speed for the preprogrammed automatic shows. Use the arrow but‐
tons to select a value between 0 and 255 (display shows ‘T000’ … ‘T255’ ).
The adjustment of the programme speed is only possible when the microphone sensitivity is
set to ‘OFF’ , so the microphone is off.
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and then [M] to return to the parent menu. To
return to the parent menu without making changes, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘DIMM’ . Press [OK] . Now you
can adjust the brightness for the preprogrammed automatic shows. Use the arrow buttons to
select a value between 0 and 255 (display shows ‘D000’ … ‘D255’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value press [OK] to confirm the selection and then [M] to return to the parent menu. To
return to the parent menu without making changes, press [M] .
Programme speed
Brightness
Operating
HL-x18 CW/WW, HL-x18 CW/WW WH
29