background image

WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.

NOTICE!
Risk of fire and overheating
The use with closed barn doors can cause fire or overheating in the spotlight. The lifetime of the LEDs will be reduced when using

the device with closed barn doors. Otherwise, the integrated thermostat causes a thermically reasonable shutdown. Use the device

only with open barn doors.

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid

direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter

‘Technical specifications’ of this user manual. Avoid heavy temperature fluctuations and do not switch the device on immediately

after it was exposed to temperature fluctuations (for example after transport at low outside temperatures). Dust and dirt inside can

damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by

qualified service personnel at regular intervals to prevent overheating and other malfunction.

Safety instructions

 

 

LED floodlight

12

Summary of Contents for HL-x18 CW/WW













































Reviews: