thomann harley benton BA500H, User Manual

Page: 12 / 28

4 Installation and operation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the device against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
A male XLR panel connector is used for the signal output (LINE OUT). The figure and the table
below show the pin assignment of a corresponding female XLR connector.
1 Ground
2 Signal (+)
3 Signal (–)
XLR connector for signal output
Installation and operation
bass head
12