thomann Fun Generation LED Pot COB 40W RGB WW, User Manual

Page: 38 / 64

n ‘16CH’ (sixteen channels)
A sound-controlled show can only be activated when the unit is operating in stand alone
mode or as master in a master / slave combination. This setting is only relevant if the device is
not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘Soud’ . Press [Setup] . Use [Up] and [Down] to
activate one of the available sound modes ‘SO.00’ … ‘SO.38’ .
Press [Setup] . Now you can adjust the sensitivity for the sound control. Use [Up] and [Down] to
select a value between 0 (low sensitivity) and 31 (high sensitivity), display shows ‘SU.00’ …
‘SU.31’ . The selected sensitivity also applies to the sound control activated via DMX.
The light effect keeps running slowly if no sound signal is received.
Sound control
Operating
LED lighting set
38