thomann Fun Generation LED Pot COB 40W RGB WW, User Manual

Page: 37 / 64

This setting is only relevant when the device is controlled via DMX.
Press
[Mode] until the display shows ‘d.xxx’ . Press [Setup] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (display shows ‘d.001’ … ‘d.512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
4-channel 509
6-channel 507
8-channel 505
16-channel 497
Press [Setup] . Now use [Up] and [Down] to select one of the following DMX operating modes:
n
‘4-CH’ (four channels)
n
‘6-CH’ (six channels)
n
‘8-CH’ (eight channels)
DMX mode
Operating
LED Pot SystemCOB 40W RGB WW
37