thomann A 10 LA, User Manual

Page: 23 / 40

7 Preset button
This button has two functions:
n
If it's kept pressed while turning the device on, the ID assignment is made. The internal digital signal processor
(DSP) assigns a new ID to the device for the remote control within the Pronet network. Each device must have a
unique ID so that it can be represented in the Pronet network. If you assign a new ID, all devices with already
assigned IDs must be turned on and connected to the Pronet network.
n
If the device is already on, pressing the button selects the DSP preset. The selected preset is indicated by the
corresponding LED.
– STANDARD
This setting is suitable for vertically flown line arrays, which consist of four to eight devices, or for the middle
area of a larger flown array. It can also be used for stacked arrays.
– LONG THROW
This setting can be used in arrays with more than six or eight devices and be loaded in the top or the top two
devices in order to achieve a more balanced distribution of sound pressure, especially when these devices
are aimed at distant targets or the upper galleries of a large house.
– DOWN FILL / SINGLE BOX
This setting, which provides a much smoother frequency response can be loaded in the lower (usually one or
two) devices of a large flown array to achieve a pleasant sound for the audience near the stage. This setting is
also very useful if the device is used alone at the front on very large stages.
– USER
Connections and operating elements
A 10 LA
23