thomann A 10 LA, User Manual

Page: 19 / 40

3. Position the vertical latch of the flight frame in the U-rail of the top unit.
4.
Secure the latch in the correct position with a safety pin at the U-rail.
5.
For flying operation, mount a shackle on the flying frame. It must be located directly
above the centre of gravity of the entire system. In the figure, the centre of gravity is
marked by ‘C’, the arrow shows the correct position of the U-shackle for this installation
situation.
The flying frame can also be used as a framework for positioning of a device on the floor. In
this case, turn the unit by 180° upside down and attach it to the flying frame, as described in
chapter Installation of a flown system. Then turn the whole thing around and put the flying
frame with the rubber feet on the ground.
Assembly of a device for posi‐
tioning
Installation
A 10 LA
19