3.
Press
[REC]
.
ð
The indicator light next to the SD card slot lights up and the display prompts you to
select a file for recording.
4.
Use the keypad to select a file. If the indicator light above a keypad button flashes, this
file already contains a DMX sequence. When choosing a file that already contains data,
the new recording will overwrite the previous data.
ð
After selecting a file, the rectangle in the display indicates that the device is ready to
record.
5.
Press
to start the recording. Now use your DMX controller to perform the show that
should be recorded.
ð
The dot in the display indicates the running recording.
‘DMX’
is flashing in the dis‐
play when a signal is received from the DMX controller.
6.
Press
for at least two seconds to stop the recording.
Operating
DMX recorder
24
