THM Clavicula M3, Instruction Book

Page: 12 / 32

12
Clavicula M³
Assembly
Installing the Clavicula
WARNING
If not properly performed, assembly and maintenance work can cause accidents resulting
in serious or fatal injury.
-Do not overestimate your technical ability. All assembly and maintenance work should
be performed by a specialist workshop for bicycles. This is the only way to ensure that
work is conducted in a professional manner.
Preparing the frame
It is imperative you read and observe the safety and
assembly information provided by the manufacturer
of your frame.
 Secure your bicycle in an appropriate assembly
stand.
 If necessary remove the crankset and the old bottom
bracket.
 If necessary, use cleaning solvent or other similar
agents to clean the bottom bracket housing of your
frame.
 Make sure that the edges of the bottom bracket
housing are plane, parallel, milled to the correct
dimensions and free of burrs – see
Size , page 10.
If necessary, rework the bottom bracket housing
using an appropriate milling tool (Cyclus, ParkTool
or other similar tool).
 Make sure that the threads of the bottom bracket
housing are clean, free from paint residues and
adequately tapped into the housing. If necessary,
rework the threads with an appropriate cutting tool
(Cyclus, ParkTool or other similar tool).
(fig. 1)
1