Operating:
- switch on the sensor with pushbutton (A)
the operating indicator (B) will light green after a few seconds.
After 4 min heating phase indicated by the green indicator the
sensor will be ready to detect gases. Indicator will flash green.
- If the Gas alarm detects gas it will send a Signal to the main unit
which turns into alarm mode immediately. If the gas alarm still
detects gas after 30 seconds, it will trigger an alarm again. Fast
flashing operating indicator indicates an alarm.
- If the operating indicator is permanently green during normal
operation (after heating phase) a sensor fault is indicated.
Technical specifications:
Power supply: 12/24VDC
Current consumption: appx. 70mA
Weight: appx. 60g
Detection: from 50ppm narcotic gas, Propane, Butane
Range:
25mtr (cleared area)
Tx frequency:
433,9Mhz
Tx Power:
<10mW
Delivery scope:
Radio Gas Alarm, power cable, manual, mounting materials,alarm sticker
Important remark:
The user has to make sure that the devices are mounted and used in a manner
which ensures the prevention of material damages, injuries, or accidents. In
case of disregarding the obove desribed mounting instructions, the user takes
full responsibility.
The manual is translated from german.
English
