Alarmtechnik made in Germany
2
safe.lock closes the security gap in the central locking system of the affected ve-
hicles. It controls the central locking over the delivered safe.lock conversion pcb,
thus avoiding the unsafe wireless control of the original vehicle key. By activating
the central locking system the safe.lock conversion pcb controls the safe.lock
module, resp. the WiPro III safe.lock which is connected to the vehicle system.
1. Inserting the conversion pcb into the vehicle key
Please contact a key service in order to get the immobilizer transponder copied.
If you fail to do so, you won’t be able to start the engine with the vehicle key. You
can find a suitable key service under the following link:
http://www.ihreschluessel.de
- Open the key housing
- Pull out the original electronics
- Fix the copied transponder into the
housing (see below)
- Insert the conversion pcb
- Mount the vehicle key
2. Programming and deleting of conversion pcb‘s and/or
wireless remote controls
As described in the manual of the respective product
(safe.lock module/WiPro III).
3. Usage
With the modified vehicle key you can as usual use your vehicle. An exception is
a vehicle key with three buttons, by which a separate unlocking of the load com-
partment is technically impossible. Both unlock buttons will unlock the entire
vehicle. The optionally available wireless remote control has accordingly marked
lock and unlock buttons.
Technical specification:
Power supply:
3V (CR2032)
Battery life:
appx 2 years (depending on usage)
Transmission frequency/-power:
868,35MHz / <10mW
Temperature range:
-20°C up to +80°C
Scope of delivery
: safe.lock conversion pcb
* use glue
*
Tutorial video for opening the key: open
the following link
https://www.thitronik-automotive.de/index.php?id=145
