GapGun MX+/SPC3d6 Connectivity Guide
© Third Dimension Confidential Document D11-678
Page 7
SPC3d6.0
GAPGUN MX+ HANDLE IP SETTINGS
The default setting for the GapGun MX+ handle IP address is;
100.0.0.1
This address is the static IP address of the physical GapGun
MX+ on the network.
You do not need to change this. If you had multiple GapGun
MX+’s working in the same area you would give each one an
incremented IP address.
Tap the title bar to exit.
GAPGUN MX+ NETMASK MENU
Check the GapGun Netmask.
GAPGUN MX+ NETMASK SETTINGS
The default settings for the GapGun MX+ netmask is;
255.255.0.0
If this is changed please make a note of the new values as you
will need them later during this procedure. It is recommended
that these values be left as default.
You have now checked that the default settings on your GapGun MX+ handle are set. Next you need to edit the wireless LAN
settings on your PC to match those of the GapGun MX+.
