Thinkware DASH CAM H50, User Manual

Page: 24 / 25

22
3-2-1. Setting
3-2. PC ViewerSetting

Others
Language : Sets the system language
Set time zone
: Sets the time zone
Date/Time : Sets the date/time
Get current time : Retrieves the current time from the PC
Units of Speed
: Sets the unit for the vehicle speed
Vehicle voltage : Sets the voltage level for the dash cam to automatically shut down in order to prevent
the vehicle battery from draining

Version
: Version information for the device and its firmware
 Save
Press Save button to store the new configuration on the MicroSD card and apply the changed settings
Saved configuration is stored in blackbox.cfg file located in MicroSD card under Settings folder
Insert the MicroSD card with changed settings to apply the changes to the device
 Memory partition :
Sets how storage space on the memory
card will be allotted for each recording
mode

Settings
Voice Recording
:
Sets the voice recording on/off and
recording volume
Voice Guidance :
Sets the voice guidance on/off and the
volume
Impact Sensitivity :
Sets the impact sensitivity of the G-Sensor
Motion Sensitivity :
Sets the sensitivity of the motion detection
sensor
Deleting/Removing blackbox.cfg file using PC file explorer will disable the use of PC Viewer. In such
case, insert the MicroSD card and power on the device which automatically generates blackbox.cfg
file with default settings to enable use of PC Viewer.