Thinklogical TLX1280 Product Manual Download Page 34 | Manualshive

Page: 34 / 45

background image

Page 30

TLX1280 Matrix Switch Product Manual

thinklogical

Rev. B, March 2019

Product Support

Thinklog

ical’s support personnel are available

Monday through Friday, from 8:30am to 5:00pm,

Eastern Time Zone. If your application requires assistance at some time outside of our normal
business hours, please contact us beforehand, if possible, and we will have someone available to
assist you.

Warranty

Thinklogical warrants this product against defects in materials and workmanship for a period of one year
from the date of delivery, with longer terms available at time of purchase on most products. Thinklogical
and its suppliers disclaim all other warranties. Please refer to your product invoice for the Warranty
Terms & Conditions.

Defect remedy shall be the repair or replacement of the product, provided that the defective product is
returned to the authorized dealer within a year from the date of delivery.

If you wish to return your device, contact the Thinklogical authorized dealer where you purchased the
device, or if you purchased directly, call Thinklogical at

1-800-291-3211

(USA).

Return Authorization

If you must return a product to Thinklogical directly, please contact us at

1-800-291-3211

or

1-203-647-

8700

. Customer Support will ask you to describe the problem and will issue you a

R

eturn

M

erchandise

A

uthorization

number

(RMA#). Pack the device in its original box, if possible, and return it with the

RMA# printed on the outside of the box.

Note: DO NOT return a product to Thinklogical without a Return Merchandise

Authorization.

Our Addresses

If you have any product issues or questions or need technical assistance with your Thinklogical system,
please call us at

1-800-291-3211 (USA only)

or

1-203-647-8700

and let us help. If you need to write us

or return a product, please use the following address:

Please include the Return Merchandise Authorization number:

Thinklogical,

A

BELDEN

BRAND

100 Washington Street

Milford, CT 06460 USA

Attn: RMA#

Website:

www.thinklogical.com

Facebook:

www.facebook.com/ThinklogicalUSA

LinkedIn:

www.linkedin.com/company/thinklogical

:

http://plus.google.com/u/0/109273605590791763795/about

YouTube:

www.youtube.com/user/thinklogicalNA

Twitter:

@thinklogical

«
...
32
33
34
35
36
...
»

Summary of Contents for TLX1280














































Reviews:

No comments

Related manuals for TLX1280

Brand: BABBITT Pages: 14

Brand: BABBITT Pages: 10

BNI IOL-727-S51-P012

Brand: Balluff Pages: 20

Brand: Intermatic Pages: 1

S6520X-EI Series

Brand: H3C Pages: 34

TRANSFER SWITCH

Brand: Generac Power Systems Pages: 1

SecureStack B2 B2G124-48P

Brand: Enterasys Pages: 91

CT-HDVD-4X14K-SW

Brand: NB Pages: 23

Brand: Veris Industries Pages: 2

Brand: Allied Telesis Pages: 56

Brand: e+p Pages: 2

Brand: Grizzly Pages: 2

ProAV Series JTD-MINI0102/4k

Brand: J-Tech Digital Pages: 21

Brand: Yolink Pages: 27

Brand: CYP Pages: 16

Brand: SP Controls Pages: 24

DirectForce Pro

Brand: VRS Pages: 5

Brand: Sony Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands