JANUARY 2010
9
REVISION C
3.3.3 Digital Video Interface (DVI-D) Output - Receiver
The SPE Receiver unit connects to your DVI-D video monitor, projector, or other viewing device at the
remote destination. Your device must have a DVI-D connector.
3.3.4 USB Type B
– Transmitter
Connect your PC
’s USB-A port to the Transmitter’s USB-B port using the provided USB A to B Cable
(CBL000015-006FR). The USB-B port is located on the rear panel of the Transmitter unit.
Figure 7:
USB Type B port and connector
3.3.5 USB Type A
– Receiver
Using the cables on your USB devices, connect up to four devices to any of the USB- A ports located on
the rear panel of the Receiver unit.
Figure 8:
USB Type A port and connector
3.3.6 AC Power Supply
Two separate wall-pack AC to 5VDC power supplies (PWR-000022-R) are included. A power jack
located on the rear panel of the transmitter and receiver units accepts the 5VDC input.
POWER SUPPLY SPECIFICATIONS
Universal Input: 100-240 VAC 50/60Hz Nominal
Continuous Short Circuit Protection
Over Voltage Protection
Conductive EMI Meets CISPR/FCC Class B high efficiency, 75% Typical
AC Plug is adaptable
Figure 9:
AC to 5VDC Power Supply (PN: PWR-000022-R) with optional AC adapters
