Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual
13
Rev.
E
, June 2012
the supplied CAT5 Cable Assembly (CBL-000001-002M). A DB9M to RJ45F and a DB9F to
RJ45F adapter is included with KIT-000033 (Fig. 6, pg. 13).
The serial port on the CFL-6000 varies from the CFL-3000, CFL-4000, and CFL-5000 systems
in that serial data from the PC is broadcast to both Camera Side units (transmitters). However
,
serial data to the PC only comes from Camera 1 on the Camera Side
(transmitter 1).
Serial Port communications are sampled at approximately
32 MHz
going from the
Camera to Frame Grabber (RX, DSR, CTS)
Serial Port communications are sampled at
97 MHz
going from the Frame grabber to the
Camera (RTS, TX, DTX).
The pin-outs for the Serial Port (RJ45 connector) are as follows:
Figure 6:
Diagram showing the serial connections used as data terminal connections
and the included DB9 to RJ45 adapters. Other uses are also possible using each signal
to control a function at the camera end, such as lighting, sensors, etc.
