24
Blender Jar Assembly
• Using the blade’s collar to handle, place any
of the 2 blade attachments: emulsifying blade
and grinding blade into the base of the blender
jar. (See Figure 4.) Always check to be sure the
ring is present and properly fitted into the collar
before use. Turn clockwise to tighten the blade
assembly until well fit.
IMPORTANT:
Make sure
the blade assembly is properly attached to the
base of the blender jar before adding food for
processing.
• Add food to be processed to the blender jar.
NOTE:
When blending, foods or liquids tend to
expand as they rise up the side of the blending
jar. Do not fill blending jar more than the Max
Line, 4 cups (32 oz.) with food to be processed.
(Please consult the Processing Capacity Chart
on page 6.)
•
WARNING:
Never overfill the blender jar. To
avoid personal injury, leakage or damage to the blender, do not fill
more than the Max Line.
WARNING:
Pay close attention while pro-
cessing. Never operate the Thinkkitchen Dynamic Blending System
when the blender jar is empty.
Blending/Chopping in the Blender Jar
• Make sure the lid is firmly positioned on the jar.
• Add the measuring cap onto the lid and twist clockwise. An audible
click can be heard as the measuring cap is locked and sealed.
Blending/Chopping in the Tall or Short Tumbler
• Add up to 3 cups (24 oz.) food to the tall tumbler or 1+ cup (9 oz.)
food to the short tumbler. WARNING: Never overfill the tall or short
tumbler. To avoid personal injury, leakage or damage to the Think-
kitchen Dynamic Blending System, do not fill more than the Max Line.
(Please consult the Processing Capacity Chart on page 6.)
FIGURE 3
FIGURE 4
NITRO_BLENDER.indd 24
2/26/2016 2:47:47 PM
