Think Appliances Venini_VCH92G, User Manual

Page: 22 / 29

EXTRACTION OPERATION – Installation Instructions
Â
Ensure that you have fitted the union (‘N’) to the upper part of the hood
using the packaged two screws supplied inside the packing (Fig. 1 – on
right). Using a 125 mm diameter pipe, connect the union (N) on the
upper part of the hood (see Fig. 1) to the discharge outlet for cooking
vapours with a cross-section of at least 150 cm
²
.
Â
PLEASE NOTE: If there is no discharge outlet and the hood is to be
fitted to an outside wall of the building, make a hole in the wall that is
large enough to fit a wind and rain-proof shutter with a cross section of
at least 150 cm
²
and connect this to the outlet union of the unit by
means of a pipe.
.
AIR PURIFIER (RECIRCULATION) OPERATION - Installation
Instructions
In this case, air is recycled through
the vent ‘R’ (Fig. 1 – above). When
using the unit as an air purifier, you
need to install two active carbon
filters to absorb cooking vapours
(please see page 11).
The cooker hood can be
converted to work as an air
purifier in the event that there is
no provision for an external air
discharge duct.
* Note on what to do if your Cooker Hood is the version that
comes with a BRACKET.
21
Extraction / Air Purifier Modes of Operation
Please note: For the extraction function, you
will need to connect a 125 mm diameter outlet
chimney to the spigot ‘N’ in fig. 1 above. This
pipe is not provided with your cooker hood. See
figure on left.