INSTALLATION INSTRUCTIONS
– Installing your Cooker Hood
:
The cooker hood must not
be fitted above stoves with a
radiant top plate.
PLEASE NOTE THAT YOU WILL HAVE
TO DECIDE BEFORE INSTALLING YOUR
COOKER HOOD THAT YOU CAN ADAPT
IT AS AN EXTRACTION FAN.
:
We recommend that at least
two people install this hood.
NOTE: Your Cooker Hood should only be fitted on a wall. Do
NOT position it any less than 700 mm (70 cm) above the hob.
1)
Remove the metal anti-grease filters
(See figure at right).
2)
Position the hood against the wall and mark the position of the support
holes that are to be drilled as shown in the figure below. These support
holes can be found on Fig. 4 on next page marked as ‘D’ with the
anchoring holes marked as ‘E’ (Fig. 4 on next page). If you hood comes
with an attached jig, use that as a guide to make the marks for the screw
holes.
15
Summary of Contents for Venini_VCH92G
Page 3: ...2...
Page 17: ...16 Rear view of your cooker hood INSTALLATION INSTRUCTIONS Attaching the Hood...
Page 29: ...28...
