© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021408/04/21
Phone +49 551 79001-0 · Fax +49 551 79001-65 · [email protected] ·
Page 8 of 9
2.2 Equipment:
4.3251.0x.001
•
1 x Wind interface for connection of different types of wind transmitters.
•
3 x RS422 (1 x RS 485 *) input interfaces.
•
3 x RS422 output interfaces.
4.3251.0x002
Same as 4.3251.0x.001 however, additionally:
•
2 x Analogue inputs (temperature, rel. humidity).
•
1 x integrated pressure sensor (atmospheric pressure).
4.3251.0x.902
•
1 x Wind interface for connection of different types of wind transmitters.
•
3 x RS422 (1 x RS 485 *) input interfaces.
•
3 x RS422 output interfaces.
•
2 x Analogue inputs (temperature, rel. humidity).
•
1 x Integrated pressure sensor (atmospheric pressure).
•
Connection for voltage supply (2 x 12VDC) of the external GPS system
212520 and interface transducer.
*
COM1: Selectable between RS 422 und RS 485
3 Display
The wind velocity is displayed as instantaneous value and the wind direction as delayed
value (factory setting).
The wind direction can be displayed in four different versions, by means of a change of
operating mode setting (refer to
chapter
1. The setting „WD instantaneous“ indicates the instantaneous wind direction.
2. The setting „WD delayed“ indicates the delayed wind direction after an e- function (
T
= 6sec).
3. The setting „WD instantaneous & variation“ indicates the instantaneous wind direction
and its variation, whereby the variation band follows the instantaneous value of the
wind direction during connection establishment. Disconnection of the variation band
takes place with a timing cycle of 1 second in 5° steps.
4. The setting “WD delayed & variation” indicates the delayed wind direction and its
variation, whereby the „variation band“ follows the delayed wind direction during
connection establishment. Disconnection of the „variation band“ takes place with a
timing cycle of 1 second in 5° steps.
