5.2 Mechanical Mounting
The wind direction transmitter must be mounted on an instrument carrier, which is suited for the
measurement. For dimensions of wind direction transmitter please refer to chapter 10.
Tools:
Hexagon socket wrench SW3
(Allen key)
Procedure:
1. Push cable/ plug connector of the wind
direction transmitter through the borehole
of the mast, tube, arm etc.
2. Put wind direction transmitter on mast,
tube, arm etc.
3. Align the wind direction transmitter
“northwards” (
procedure see chapter
5.2.1
).
4. Safeguard the wind direction transmitter
by two M6-Allen head screws
Remark:
Suitable instrument carriers are masts, tubes, traverses, arms, adapters, adapters of POM for iso-
lated mounting, which correspond to the mounting dimensions of the wind transmitter, and to the
static requirements.
The inn
er diameter of the instrument carrier should be ≥ 20 mm based on plug- and cable feed-
through.
7 - 22
021754/05/14
