THIEMAN NTEA TVL Series, Installation Instructions Manual

Page: 10 / 12

10.
INSPECTION AND LOCATION OF DECALS
Inspect all decals listed below to be certain they are in the proper location and are legible.
ALL DECALS MUST BE IN PLACE AND LEGIBLE OR ALL WARRANTIES ARE VOID!
Item Part Name Part Number
1 Warning Decal-center load 4682
2 Fast Idle Decal 4650150
3 Danger Decal-no riding 4609
4 Operating Decal 4650780
5 Capacity Decal 1250# 4650060
5 Capacity Decal 1600# 4650750
6 Caution Decal-pinch point 4650790
7 Caution Decal-cover 4650760
8 Caution Decal-working area 4650770
9 Reflector (3) 5705
10 Thieman Nameplate 4650801
11 Toggle Switch Decal (1) 4650820
12 Wiring Decal 4617
13 Warning Decal - High Pressure 4620
14 Lubrication Instruction Decal 4662
15 Lube Location Decal (4) 4663
16 Urgent Warning Decal 4681
Step 17 Thieman recommends that the installer perform a weight test of the liftgate to check
the welds or mounting bolts and the structural integrity of the body or frame of the
truck or trailer. The load used should be the maximum weight rating of the partciular
liftgate with the weight centrally located on the platform. A minimum of 20 cycles
should be made to insure the integrity of the mounting.
Step 18 Any lights that were removed or obstructed must be replaced or relocated in such
a manner that the completed vehicle must be in compliance with FMVSS 108 (49
CFR 571.108) If the liftgate was ordered with the optional light kit, refer to the light
wiring pictorial for wiring details.