
D/^^/KEϲ<භϭϬ<
^/E'>W,^
Rev. 02 –13 October 2015
7
3.
INSTALLATION
3.1 Unpacking
and
inspection
1. Unpacking the box and check the UPS. If damaged or some parts missing, don’t start the machine
and inform your supplier.
2. Check the box content (please consult Box Content Table).
3. Check if the UPS is that you wanted to purchase. You can verify it on the label on the rear panel of the
UPS.
3.2 Installation
note
Put the UPS at flat place next to the equipment.
Keep UPS at least 20cm from wall or equipment or other object. Don’t block the ventilation holes of the
UPS front panel and bottom part, so as to keep the ventilation in good conditions to prevent the
temperature inside becomes high.
Keep the UPS away from high temperature, water, flammable gas, corrosive gas, dust, direct sunlight or
explosive. Don’t leave the UPS outdoor.
Install a double-pole joined actuator with more than 40A/63A
˄
6KVA/10KVA) at the input L-N, in order to
cut off the power when in emergency situation.
PDU is required to connect to the UPS output so as to weaken the affect between loads.
In order to fix the UPS, please lock its wheels by shifting the sheet on each wheel.
RCD load like computer, linear load and small inductive load can be connected to the UPS. Please
contact dealer if other types of loads are required to connect.
For the security of the users and equipments, please be sure to take correct power configuration.
Fig.3-1 Correct power configuration
U
P
S
LOAD
INPUT L
OUT PUT L
L
N E
INPUT N
OUT PUT N
Fig.3-2 Wrong power configuration
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK