Thiele Grade 100 Operating Instructions Manual Download

Page: 11 / 11

OPERATING INSTRUCTIONS

CHAIN SLINGS GRADES 80 AND 100

THIELE GmbH & Co. KG

# Change indicator

www.thiele.de | [email protected]

B11082-C

replaces B11082-B

US 01.2020

11 | 11

12.

STORAGE

Chain slings must be stored properly sorted, suspended and in
dry conditions at temperatures between 32 °F and 104 °F.

Do not store in a manner that causes mechanical damage.

13.

THIELE OPERATING AND MOUNTING
INSTRUCTIONS

Current operating and installation instructions are available as
a PDF download on the THIELE-website www.thiele.de.

14.

PUBLISHING INFORMATION

Distrubutor:

KWS Inc.

P.O. Box 470487, Tulsa, OK 74147, USA

Phone number 800-872-9313

Fax 1 918-665-4118

Email [email protected]

Manufacturer:

THIELE GmbH & Co. KG

Werkstraße 3, 58640 Iserlohn, Germany

Phone 49 2371/947-0

Fax 49 2371/947-241

Email [email protected]

Summary of Contents for Grade 100












Search results

Summary of Contents for Grade 100

Reviews:

Related manuals for Grade 100

Brands by name

Popular brands

Thiele Grade 100, Operating Instructions Manual

Search results

Summary of Contents for Grade 100

Reviews:

Related manuals for Grade 100

Brands by name

Popular brands