Thiel SmartSub SS1, Owner'S Information

Page: 13 / 16

13
Connect subwoofer power cord, set On switch, auto on switch, set position controls
Subwoofer
Setup
integrator
Adjustment
Is effects channel
level balanced?
Adjust subwoofer
level
Add subwoofer Finished
Does
subwoofer play
loudly enough?
Does
subwoofer play
loudly enough?
Listen
Y N
Y N
Set Integrator to
Crossover mode
If LFE input not used set subwoofer’s
LFE level control to OFF
Set Integrator to
Augment mode
Set Main speaker amp gain.
Set crossover frequency
as low as it will go.
Set four Main Speaker,
# of subwoofers,
# of channels parameters
Connect additional cables
from main speaker amplifier
outputs to crossover’s
speaker level inputs
Connect processor or preamp
outputs to controller inputs.
Connect Integrator outputs to
main speaker amplifier inputs
Connect crossover’s or Integrator’s subwoofer
output to subwoofer’s Normal input
Y N
If LFE input is used
set main speaker
Amp Gain
Is main
channel bass level
correct?
Adjust Low
Frequency Level
Finished
Increase crossover
frequency
Increase Low Frequency Extension
setting, decrease LFE Level setting
or add subwoofer
Y N
Is effects
channel correct
loudness?
Adjust LFE Level
Y N
Y N
Y N
Do main
speakers play
loudly enough?
Listen
Test speaker polarity and
reverse connections at each
speaker if necessary