23
VLC-3 rev.04
VLC-3
67(3
If the program state is ON, push the push-button to step to the start
time. Otherwise, push the push-button to step to light peak #.
Start time:
The start time is entered as a clock time. The hours value
flashes on the display. Use the adjustment knob to set the hours. Press
the push-button. The minutes flash on the display. Use the adjustment
knob to set the minutes.
67(3
Press the push-button to step to the stop time.
Stop time:
The stop time is entered as a clock time. The hours value
flashes on the display. Use the adjustment knob to set the hours. Press
the push-button. The minutes flash on the display. Use the adjustment
knob to set the minutes.
67(3
Press the push-button to step to the maximum intensity.
Maximum intensity:
This is the maximum light intensity for the current
light program. Use the adjustment knob to set the value as required.
Values range from 0 to 100% of full intensity.
67(3
Press the push-button to step to the next dusk-to-dawn program in
this period.
9.1.2 Light Peaks
Peak #:
Light peaks are numbered from 1 to 20 for each period. The
display shows
PE . 1
where 1 (flashing) is the light peak number. If no
light peaks have yet been entered in the controller, the user must start
by entering light peak 1. Otherwise, the user can select the light peak
using the adjustment knob. If you turn the adjustment knob past the
