Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
T +39 0744 709071
F +39 0744 719833
www.thetfordmarine.com
43
R
ev.
V
03
Design and Flexi Line | instructions for installation and use | ENG
1.2
Cleaning
Ceramic is particularly suitable for toilets, as it guarantees hygiene and it is resistant against
any cleaning product. Do not use acetone- or trichlorethylene-based products, or any
product that may irreversibly damage the rubber components of the pump/macerator/check
valves. We recommend using Thetford products, as they are specifically tested for this type
of systems. Do not use aggressive products or abrasive sponges on carbon or coloured
products (other than white or pergamon). We recommend applying a small amount of
product to the rear of the toilet first to check its suitability.
WARNING: Comply with the environmental protection standards in force when
choosing and using cleaning products.
1.3
Winterising
TECMA products do not need special maintenance or winterisation.
It is however suggested periodically and in preparation for the winter of:
•
Perform maintenance of the solenoid valve and / or intake pump filters.
•
Perform rinsing cycles with clean water.
•
Completely empty all the systems to prevent the pipes from freezing or use a specific
antifreeze product.
Do not use automotive antifreeze products or products used in the windscreen washer
solvent tank.
Comply with the environmental protection standards in force when choosing and using these
products.
1.4
Toilet seat cover
The Flexi and Design range include different seat cover configurations. Respectively,
Thermosetting and polyester both with and without Soft Closing. Do not accelerate the
normal excursion of the hinges in the configuration with Soft Closing in order not to affect
the operation.
1.5
Choosing the type of toilet paper
Only use toilet paper. The system is designed to dispose of toilet paper effectively. Do not
use paper towels or similar products.
Tecma recommends using Thetford Aqua-Soft.
