Theta Digital Casablanca III HD, Owner'S Manual

Page: 74 / 106

74
Six Shooter
The Six Shooter is an external preamp/analog switcher that allows the 6 analog output channels of an SACD or DVDA
player to integrate with the Casablanca III HD. There are 3 inputs and one output on the Six Shooter. The first two
inputs are designed to receive 6 channels of analog SACD or DVDA signal. The third input receives the first 6 output
channels from the Casablanca III HD (L/R/C/LS/RS/S1). The output of the Six Shooter is connected to the amplifier
inputs.
The first two inputs of the Six Shooter contain high-quality analog volume controls. The volume for these two inputs is
controlled by the Casablanca III HD. Volume for the third input (first 6 channels of the Casablanca III HD) is done in
the Casablanca.
To install the Six Shooter, select the appropriate
INPUT SELECT button on the Casablanca III HD, then press
SETUP\INP\A-D\6 . Using the LEVEL UP\DOWN buttons, select the correct Six Shooter input for this INPUT SELECT
button. When the Six Shooter is installed, each INPUT SELECT button must have a value of either 1 (Input #1 of the
Six Shooter), 2 (Input #2 of the Six Shooter), or 3 (Casablanca III HD pass-through for all signals processed by the
Casablanca III HD).
1 will route the Six Shooter’s # 1 source to the amplifiers.
2 will route the Six Shooter’s # 2 source to the amplifiers.
3 will route the Casablanca III HD directly to the amplifiers.
Next, for each Input Select button set to either
1 or 2 , go to the Audio Source menu ( SET-UP/INP/SOURCE ) and set
all 3 jacks to OFF .
Press
SET-UP 3 times to return to the INPUT SELECT menu.
Please refer to Appendix B for a Six Shooter wiring diagram.