Operation
GBSOTXBA_V(1).DOCX
Page - 16
4.2 Menus
There are three different menu areas:
Menu 1:
Choose language
Daily counter
Total counter
Operating hours counter
LED test
Button test
Beacon test
Menu 2:
Rack type
Merge racks
Wait for confirmation
Use buffer memory
Alarm for wrong compartment
Alarm if shelf not confirmed
Automatic OFF
Alarm at terminal value
Counting direction
Terminal value
Start value
Send value automatically
Menu 3:
MAC address
TCP port number
TCP timeout value
Use DHCP
IP address
Net mask
Gateway
Press the MENU button. The display shows "Menu 1 of 3", "Menu 2 of 3" and "Menu 3 of 3" in succession, at
intervals of approx. 2 seconds.
Hold the MENU button until you see the number of the required menu. Now release the button to activate the
corresponding menu area.
Now call up the individual menu points of the particular menu area. Press the "MENU" button briefly to move on
to the next point. After the last menu point, the system returns to the normal mode.
There is no communication with the PC while you are in a menu.
4.2.1 Choose Language
Use PLUS and MINUS to select the required language. The following languages are possible:
•
German
•
English
•
French
After pressing MENU to confirm, the display now uses the chosen language.
4.2.2 Daily counter, total counter and operating hours
In the Day Counter sub-menu, the value of the Day Counter is shown, or the value since the last time the
counter was re-set. The Day Counter can be re-set using the “Reset" key, pressing the key for a short while.
The Total Counter sub-menu shows the total number counted.
The Operating Hours sub-menu shows the number of hours the machine has operated.
