Disclaimer: Any information given is believed to be reliable. However, users should treat this information as a guideline, and independently evaluate the suitability of the product for their particular
application. Thermotex Engineering Limited makes no warranties as to the accuracy and completeness of the information and disclaims any liability regarding its use.
Thermotex Engineering Ltd
, 1a Broom Business Park, Broom Bank Road, Chesterfield S41 9QG
T:
+44 (0) 1246 453 769
F:
+44 (0) 1246 454 988
E:
W:
www.thermotex.co.uk
Revision 1.01
C O Z I S T A T I N S T A L L A T I O N I N S T R U C T I O N S & O P E R A T I N G M A N U A L
9
.
Operation Manual
POWER ON/OFF
Press once to switch the thermostat on. The display will activate
and light up blue. After approximately 10 seconds of inactivity the
screen backlight will switch off. Press once again to switch off.
SETTING THE TIME
To set the time and day of the week, first press . The minutes
shown on the time display in the lower right corner of the screen
have been selected and
will
be flashing. Adjust the minutes up or
down using the and arrow buttons. Press again to
select the hours, and then press once more to select the days,
adjusting with the arrow buttons.
CHANGING THE OPERATION MODE
Press
to switch between Manual and Programmable Modes.
When
shows Manual Mode is selected. When
shows,
Programmable Mode is selected.
SETTI
NG
UP PROGRAMMABLE MODE
To
set up Programmable Mode first press and hold for
approximately 3 seconds. The screen will light up and the time
will flash in the bottom right corner. You will also see all the
weekdays displayed across the top of the screen and the Period
1 house symbol showing in the bottom left.
To programme Period 1 (the morning switch on time) use the
and arrow keys to adjust the time (in 15 minutes intervals).
Next, press to select the Set Temperature and again use the
arrow keys to adjust the desired temperature up or down. Then,
press again to move to Period 2 and programme as before
first selecting the time and then the temperature. Select up to 6
weekday time periods.
Once you have selected the Set Temperature for time period 6,
press to move to setting the weekend programme. The
weekend days will now appear in the top right of the screen and
you can programme the times and temperatures as you did for
the weekdays. Finally, press once again to exit the
Programmable Mode setup.
TO LOCK OR UNLOCK THE PANEL
To lock or unlock the thermostat panel, press and hold both the
up and down
arrow buttons at the same time for
approximately 5 seconds. When locking,
the symbol will
appear to show the panel is locked and the buttons will become
inactive.
When unlocking, the symbol will disappear to show
the panel is unlocked and the buttons will become active.
ADJUSTING THE TEMPERATURE IN MANUAL
MODE
With Manual Mode selected ( showing on the screen), simply
use the and arrow buttons to adjust the set (desired)
temperature up or down. The Set Temperature shown on the
right side of the display will adjust accordingly.
