13
Burner Flame Check
• Light burner, rotate knob(s) from HIGH to LOW.
You should see a smaller flame in LOW
position than seen on HIGH. Always check
flame prior to each use. Perform flame check
for sideburner (if equipped). If only low flame is seen refer to "Sudden drop or low flame"
in the Troubleshooting Section.
Turning Grill Off
• Turn all knobs to OFF position. Turn LP tank OFF by turning hand-wheel clockwise to a
full stop.
Ignitor Check
• Turn gas off at LP tank. Press ignitor button or turn ignitor knob rapidly. "Click" should
be heard and spark seen each time between collector box or burner and electrode. See
"Troubleshooting" if no click or spark.
Valve Check
• Important: Make sure gas is OFF at LP tank before checking valves. Knobs lock in
OFF position. To check valves, first push in knobs and release, knobs should spring back.
If knobs do not spring back, replace valve assembly before using grill. Turn knobs to LOW
position then turn back to OFF position. Valves should turn smoothly.
Hose Check
• Before each use, check to see if hoses are cut or worn. Replace damaged hoses before
using grill. Use only valve/hose/regulator specified by manufacturer.
HIGH
LOW
Sideburner Ignitor Lighting
1. Turn gas on at LP tank.
2. Push in and turn knob to HIGH.
3. Turn or push
(up to 5 times to light burner). Be sure burner lights
and stays lit.
4. If burner does not light turn knob(s) to OFF, wait 5 minutes, try again.
Match Lighting
1. Turn gas on at LP tank.
2. Hold lit match to any port on the burner. Push in and turn
sideburner knob to HIGH. Be sure burner lights and stays lit.
• If burner does not light turn knob(s) to OFF, wait 5 minutes, try again. If the
burner does not ignite with valve open, gas will continue to flow out of the
burner and could accidently ignite with risk of injury
