lid parts, container parts, gaskets (flexible band around lid and/or stopper), or straws
(if present in the product). Hand washing is recommended to ensure that all parts of
the product are thoroughly cleaned.
•
For maximum thermal efficiency and to reduce risk of glass liner breakage, preheat or
pre-chill product just prior to use. Fill with hot/cold tap water, attach lid, let stand 5 to
10 minutes and empty water. After filling container with contents, re-cover with lid to
increase thermal efficiency. Never use a microwave, conventional oven, or other
heat source for this purpose.
ASSEMBLY & USE
Twist-and-Pour Lid (If Present):
Image for reference only: actual product may vary
1.
Remove lid (A) by twisting counterclockwise.
2.
Wash all parts separately, then re-assemble. See General Care section above for
washing instructions.
3.
Fill container with contents. Do not overfill: Leave space for the lid, to avoid overflow.
4.
Replace lid (A) by twisting clockwise.
5.
To pour, twist lid (A) counterclockwise
½
- 1 turn. Proceed to pour. Note: Lid (A) does
not need to be removed completely to pour contents.
6.
Re-tighten lid (A) by twisting clockwise.
Push-Lever Lid (If Present):
