Thermos 461410708 Product Manual Download Page 2

2  •  461410708

1. Do not store or use gasoline or other 

flammable liquids or vapors in the vicinity of 

this or any other appliance.

2. An LP cylinder not connected for use shall not 

be stored in the vicinity of this or any other 

appliance.

WARNING

CAUTION

For residential use only. Do not use for commercial 

cooking.

Call Grill Service Center for Help and Parts

• If you need assistance with your product or warranty parts call

 

1-800-241-7548. Hours of Service Center Operation are 

8:00 A.M. To 6:00 P.M. EST Monday - Friday.

• To order non-warranty replacement parts or accessories 

please visit us on the web at www.charbroil. com or call 
1-800-241-7548 and one of our friendly and knowledgeable 
agents will be glad to assist you.

DANGER

Safety Symbols

The symbols and boxes shown below explain what each heading 
means. Read and follow all of the messages found throughout 
the manual.

DANGER:  

Indicates an imminently hazardous situation 

which, if not avoided, will result in death or serious injury.

WARNING

WARNING:  

Indicates an potentially hazardous situation 

which, if not avoided, could result in death or serious 
injury.

Model Number

Serial Number

Date Purchased

IMPORTANT: Fill out the product record information below.

See rating label on grill for serial number.

DANGER

If you smell gas:

1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the 

appliance and immediately call your gas 

supplier or your fire department.

Installation Safety Precautions

Use grill, as purchased, only with LP (propane) gas and the 
regulator/valve assembly supplied. 

Grill installation must conform with local codes, or in their 
absence of local codes, with either the 

National Fuel Gas 

Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane 
Installation Code, CSA B149.1, or Propane Storage and 
Handling Code, B149.2, or the Standard for Recreational 
Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, 
Recreational Vehicle Code, as applicable. 

• All electrical accessories (such as rotisserie) must be 

electrically grounded in accordance with local codes, or

 

National Electrical Code, ANSI / NFPA 70, 

  Keep any electrical cords and/or 

fuel supply hoses away from any hot surfaces.

• Grill is not for use in or on recreational vehicles and/or boats.
• This grill is safety certified for use in the United States 

only. Do not modify for use in any other location. 

Modification will result in a safety hazard.

or 

Canadian 

Electrical Code, CSA C22.1.

and/or 

Canada

 

WARNING

CALIFORNIA PROPOSITION 65

1. Combustion by-products produced when using this 

product contain chemicals known to the State of 

California to cause cancer, birth defects, and other 

reproductive harm.

2. This product contains chemicals, including lead 

and lead compounds, known to the State of 

California to cause cancer, birth defects or other 

reproductive harm.

    

 Wash your hands after handling this product.

Summary of Contents for 461410708





























Reviews: