Page 27
Installation, use and maintenance guide
SlimQuadro Idra 14
3) Now press the
Scroll Buttons to select the hour at which you wish the appliance to start up automatically (ON1). Once the hour
is set confirm the value by pressing the
Degrees Button. When scrolling the ON1 values the OFF1 values will scroll as well; this
is to avoid setting a shut off time that is earlier than the start up time.
Once confirmed, the selector shifts to the minute section of ON1. Press the
Scroll Buttons to set the minutes for the first start
up. Confirm by pressing the
Degrees Button.
4) Now press the
Scroll Buttons to select the hour at which you wish the appliance to shut off automatically (OFF1). Once the
hour has been set, confirm the value by pressing the
Degrees Button.
Once confirmed, the selector shifts to the minute section of OFF1. Press the
Scroll Buttons to set the minutes for the first shut
off. Confirm by pressing the
Degrees Button.
At this point the first ON/OFF cycle for the selected day has been set.
The following screen will appear:
At this point if no further programming is required for that day go to point 5-A.
If, on the other hand, you wish to program a second ON/OFF cycle for that day go to point 5-B.
5-A) Press the
Menu Button to exit the screen, in order to enable you to program the times for the ON/OFF cycles for the other
days of the week. In this case repeat the instructions from point 2 up to this paragraph.
5-B) Press the
Scroll Buttons to select the hour at which you wish the appliance to start up automatically for the second time
(ON2). The start up time will be that set before OFF1; this is to avoid setting a second start up time that is earlier than the
preceeding shut off time. Once the hour is set confirm the value by pressing the
Degrees Button. When scrolling the ON2
values the OFF2 values will scroll as well; this is to avoid setting a shut off time that is earlier than the start up time.
Once confirmed, the selector shifts to the minute section of ON2. Press the
Scroll Buttons to set the minutes for the second
start up. Confirm by pressing the
Degrees Button.
Now press the
Scroll Buttons to select the hour at which you wish the appliance to shut off automatically (OFF2). Once the
hour has been set, confirm the value by pressing the
Degrees Button.
Once confirmed, the selector shifts to the minute section of OFF2. Press the
Scroll Buttons to set the minutes for the
second shut off. Confirm by pressing the
Degrees Button
At this point the second ON/OFF cycle for the selected day has been set.
The following screen will appear:
At this point if no further programming is required for that day go to point 6-A.
If, on the other hand, you wish to program a third ON/OFF cycle for that day go to point 6-B.
6-A) Press the
Menu Button to exit the screen, in order to enable you to program the times for the ON/OFF cycles for the other
days of the week. In this case repeat the instructions from point 2 up to this paragraph.
6-B) Press the
Scroll Buttons to select the hour at which you wish the appliance to start up automatically for the third time (ON3).
The start up time will be that set before OFF2; this is to avoid setting a third start up time that is earlier than the preceeding
shut off time. Once you have set the hour confirm the value by pressing the
Degrees Button. When scrolling the ON3
values the OFF3 values will scroll as well; this is to avoid setting a shut off time that is earlier than the start up time..
Once confirmed, the selector shifts to the minute section of ON3. Press the
Scroll Buttons to set the minutes for the third
start up. Confirm by pressing the
Degrees Button.
Now press the
Scroll Buttons to select the hour at which you wish the appliance to shut off automatically (OFF3). Once the
hour has been set, confirm the value by pressing the
Degrees Button.
Once confirmed, the selector shifts to the minute section of OFF3. Press the
Scroll Buttons to set the minutes for the third
shut off. Confirm by pressing the
Degrees Button.
At this point the third and final ON/OFF cycle for the selected day has been set.
Alternatively, if you wish to copy the exact same programming for the ON/OFF cycles set for a particular day to the next day simply
press the
Flame button.
For example: if I want to copy all the programmed ON/OFF cycles set for Monday to Tuesday the following screen will appear:
Press the
Flame button once again to copy all the cycles programmed for Tuesday to Wednesday. The following screen will
appear:
