THERMOROSSI KOKKOLA, Manual

Page: 12 / 49

Manuale d'installazione, uso e manutenzione
PKOKKOLAPLUS – PMOODPLUS
Figura 1
A
B
7
4
6
5
129
4.2.2 UNPACKING PMOODPLUS
The appliance is delivered packed on a pallet; before positioning and installing it proceed as follows:
1) Remove the top and side panels from the pallet (A) and remove the polystyrene (B) (Figure 1).
2) Undo the two screws (C) and remove the bracket from the right side (D) (Figure 2).
3) Undo the two screws (C) and remove the bracket from the left side (D) (Figure 2).
4) Now remove the product from the pallet taking care not to damage it.
4.3 CONNECTING THE APPLIANCE TO THE FLUE OUTLET
Connection of the appliance to the flue outlet must be carried out in
strict compliance with the instructions contained in this use and
maintenance guide.
To obtain the minimum overall rear distance indicated
in the figures below it is necessary to use the TEE provided by us (code no. 70022350).
Using a standard TEE
will increase the overall rear distance, moreover the installer must guarantee a lower vertical depth equal to
or less than 74 mm. Failure to comply with this value will make it impossible to remove the blind plug for
normal cleaning operations.
Legenda: Key:
Figura Figure
TEE RIDOTTO REDUCED TEE
TAPPO CIECO BLIND PLUG
Figura 2
C
C
D
T
E
E
R
ID
O
T
T
O
T
A
P
P
O
C
IE
C
O
565
T
E
E
R
ID
O
T
T
O
T
A
P
P
O
C
IE
C
O
600