THERMOROSSI Bosky 30 EVO, Installation, Use And Maintenance Manual

Page: 13 / 46

Page 12
Installation, use and maintenance guide
BOSKY 30/F30 EVO
– BOSKY COUNTRY 30/F30 EVO
BOSKY COUNTRY 30 and BOSKY COUNTRY F30 EVO
A
– Primary air control
It is used to regulate the primary air inflow. The primary air passes through the grate of the firebox and fuels the combustion to
determine its power and speed. Rotate the control towards zero to reduce the air inflow. On the contrary, turn the control towards
eight to increase the air inflow. To prevent or limit condensation, it is recommended to keep the control on levels 5-6.
F
– Starter
This device creates a direct bypass for the flue gases which facilitates both the lighting and refuelling operations. The riddling tool
provided must be used when activating it and only when lighting or stoking the fire.
IT IS STRICTLY PROHIBITED TO LEAVE THE STARTER OPEN DURING NORMAL OPERATION.
Leaving the starter open during normal operation results in higher fuel consumption than the declared quantity, a
considerable drop in efficiency and exposure of the appliance to extremely high temperatures. For this reason the
warranty does not cover any direct or indirect damages caused by prolonged exposure of the appliance to these
temperatures.
ATTENTION: The temperature of the starter is very hot while the appliance is operating, so take
care not to touch it. The riddling tool provided must be used when handling it.
Moving the Starter outwards activates the direct bypass for the flue gases, whereas on the contrary, pushing it downwards activates
the normal flue gas path.
KEY
A Primary air control B Safety heat exchanger insertion plate
C Water thermometer E Pump active indicator light
F Starter G Smoke deviator flap (only F30 EVO)
H Thermostat probe and thermometer pocket I Air adjustment lever
L Ash pan door M Inspection door
N Grate adjustment pin Q Feed door
R Oven (only F30 EVO) S Under-oven compartment (only F30 EVO)