THERMOROSSI BOSKY 25, Installation, User & Service Manual

Page: 44 / 76

Then mount the left side panel complete with insulation (see
figure on left):
-Fit the tabs (G) into the
rectangular holes under the left
side cornice -Fit the tabs (H)
into the holes in the base and
push the side panel back until it
locks in, then secure using the 2
screws indicated.
Mount the right side panel using
the same procedure.
4.13 MOUNTING SIDE PANELS COUNTRY COUNTRY F
After positioning the cooker proceed to mount the panels, as represented in the images below ;
Proceed first to the fixing of ceramics ( 4 ) and ( 5 ) in their seats it is advisable to carry out
this operation by removing the doors themselves. Fix after degreased and dried both
ceramics and the seat, the same on the ceramic support with the thermal silicone supplied .
Before moving and reassembling the doors to the cooker you must wait at least 24 hours.
Remove profiles ( 2 ) and ( 1 ) .Now proceed to the assembly of the lateral ceramics ( 3 ) assembling
first the lower and then the upper . Insert the ceramic ( 3 ) as shown in Figure 2 and Figure 3 first
deforming the fins indicated