THERMOROSSI BOSKY 25, Installation, User & Service Manual

Page: 32 / 76

4 INSTALLATION
It IS MANDATORY THAT ONLY A COMPETENT PERSONS SCHEME REGISTERED INSTALLER
IS USED IN ENGLAND, WALES AND SCOTLAND.
4.1 LOCATING THE CENTRAL HEATING COOKER
A vital aspect to consider is that the flooring of the room in which the central heating cooker is
installed must be capable of bearing the weight of the central heating cooker.
For Country, Country F - Ensure that there is always a minimum 200mm safety gap between the
central heating cooker and combustible materials at the sides and rear. Adhere to the recommended
minimum distances illustrated in the drawing below.
For the Bosky 25, 30, F25 & F30, side distances need only to be 75MM.
For inset installations ensure that the top cast iron cornice is insulated from the surrounding
furnishings by means of lateral air spaces or compressed vermiculite insullation board or similar non-
combustable matieral.
On the country models the flow and return pipes are only available with rear connections because of
the ceramic panels as opposed to left hand or rear choice on the Bosky. Also the vintage models are
slightly wider (70mm) as the panels are convex (shown below)