29
NB:
If the function does not meet your requirements, you can manually stop the device from heating (Stand-by
mode )
.
When the function is running, the green LED flashes slowly.
HOW TO USE THE ENERGY-SAVING FUNCTIONS
To use these functions, we recommend that you set the cursor to Comfort or Programming
mode.
These functions are in addition to the programming functions.
PROG
GB
NB
: When there are no instructions from the pilot wire, the appliance heats in Comfort mode . The instruc-
tions for Frost and Stop take priority over Eco mode and Comfort mode . The changeover
time is around 12 seconds when switching from Comfort mode to Eco mode .
Set the temperature control
knob to the desired tempera-
ture.
Set the cursor to position .
The heating light illuminates if
the room’s ambient temperature
is below the desired tempera-
ture for the selected mode
(Comfort temperature in Comfort
mode
and reduced tempera-
ture in Eco mode ).
PROG
PROG
Do not heats the room while it is being ventilated allow you to save energy. If you do not turn off your
heater when a window is open for a long time, the airing function stops your device from heating
when it is not necessary: your heater automatically detects when the window is opened or closed and
therefore saves energy.
Your device reacts to an open or close window according to several variables, especially
- the temperature settings programmed for the room
- the outside temperature
- the location of your heater, etc.
By detecting whether the window is open or closed, the
airing function helps you to be environmentally friendly:
you save energy by not heating your house when you
ventilated it.
Optimum zone
ACTIVATING THE AIRING DETECTION FUNCTION
ACTIVATING THE ABSENCE DETECTION FUNCTION
The absence detection function enables you to lower the temperature setting for your room
automatically, as soon as you leave it.
The programming instructions ( ) take priority over absence detection.
PROG
